The Zeta P2 is the biscuit joiner for P-System connectors and is used to create the formlocking P-System goove within seconds.
The integrated vertical mechanical drive is automatically triggered at the maximum cutting depth and performs a lateral cutter movement for the P-System groove. Connectors with various functions and different sizes can now be inserted into the form-locking P-System groove. The insertion into the groove is quick and without tools.

https://www.lamello.com/product/p-system-einbau/zeta-p2/

Tenso P-14 is a self-clamping glueing aid and is anchored in the form-locking P-System groove within seconds. The high clamping force of Tenso leads to perfectly clamped joints without the need for clamps or presses, regardless of the angle of the work pieces. Aesthetic joining is possible without visible connectors, with short assembly times and without the need to wait for the glue to dry. Tenso P-14 is used on mitre joints from 18 mm material thickness and in butt joints from 15 mm.

https://www.lamello.com/product/p-system-verbinder/tenso-p-14/

https://www.lamello.com/product/p-system-verbinder/tenso-p-10/

Clamex P-14 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14 is firmly connected and disconnected using a lever. Clamex P-14 eliminates the need for glue, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex P-14 is used on mitre joints from 18 mm material thickness and in butt joints from 15 mm.

https://www.lamello.com/product/p-system-verbinder/clamex-p-14/

Clamex P-14 CNC is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 5 mm access hole, Clamex P-14 is firmly connected and disconnected using a lever. Clamex P-14 CNC is ideal for production on CNC machines and, unlike Clamex P-14, is automatically aligned during assembly. Clamex P-14 CNC is used in mitre joints from 18 mm material thickness and in butt joints from 12 mm.

Clamex P-14/10 Flexus is a detachable connector and is anchored in the form-locking P-System groove within seconds.
Through the minimalist 6 mm access hole, Clamex P-14/10 Flexus is firmly connected and disconnected using a lever. The flexible positioning pins allow work pieces to be installed in an already assembled cabinet, simplifying the assembly sequence.
Clamex P-14 is used in mitre joints from 18 mm material thickness and in butt joints from 12 mm.

Clamex P-14/10 Medius is a detachable connector and is anchored in the form-locking P-System groove within seconds.
Through the minimalist 6 mm access hole, Clamex P-14/10 Medius is firmly connected and disconnected using a lever. The connector for divisions has two installation depths and is used when two shelves are attached to the same dividing panel at the same height. Due to the reduced installation depth of 10 mm, the minimal thickness for the division is 16 mm.

Clamex P-10 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-10 is firmly connected and disconnected using a lever. Clamex P-10 eliminates the need for glue, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex P-10 is used on mitre joints from 15 mm material thickness and in butt joints from 12 mm.

https://www.lamello.com/product/p-system-verbinder/clamex-p-10/

Bisco P is a plastic biscuit which fits into the 7 mm P-System groove and is held in the groove due to its surface structure. Bisco P is used in combination with Clamex or Tenso as a cost-effective alignment element and ensures flushness of the joint. The Bisco can also be used as a dry joint as a test before the work piece is permanently joined with Tenso P and adhesive. Bisco P-14 is used in combination with Clamex P-14 or Tenso P-14 and Bisco P-10 with the same connectors in size P-10.

https://www.lamello.com/product/p-system-verbinder/bisco-p/

https://www.lamello.com/product/p-system-verbinder/bisco-p/

Divario P-18 is a detachable connector for slide-in insertion and is anchored in the form-locking P-System groove within seconds. The connector is used to slide shelves or partitions into an already assembed cabinet. In the process, the Divario P-18 clamps the workpieces together firmly and ensures perfectly closed joints without visible connectors. Divario P-18 is used for joining shelves to divisions from 18mm panel thickness or in butt joints from 12mm.

https://www.lamello.com/product/p-system-verbinder/divario-p-18/

Cabineo is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The Cabineo is installed in the board either in the workshop or on site. The pre-assembled screw in the connector is screwed into the 5 mm hole of the second workpiece using a cordless drill. Cabineo impresses with its time-saving processing and assembly as well as the high clamping force which leads to stable connections without the need for additional dowels. Cabineo is available in white or black.

The new metallic colours „silver“, „nickel“ and „dark steel“ complete the already extensive Cabineo cover cap range. With the new metallic-look versions, the colour of the cover cap can be matched to the aluminium or stainless steel fittings and the Cabineo connector can become a design element in the piece of furniture.There are now different options for visually incorporating the connector into the workpiece: without cover cap, with cover cap in matching colour (to make the Cabineo blend into the background) or with the new metallic-look cover cap to set a visual accent.

 Cabineo 8 M6 is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The connector is ideal when joining wood composites with materials such as aluminium, steel or compact laminate.

After installing the connector in the board, the pre-assembled metric screw is screwed into a threaded hole or a socket, using a cordless drill. Cabineo impresses with its time-saving processing and assembly as well as the high clamping force which leads to stable connections without the need for additional dowels.

Invis Mx2 is a unique, magnet-driven connection for the highest demands on aesthetics, stability and productivity. With no visible openings, Invis Mx2 is connected and disconnected quickly again and again, using its magnetic drive. Invis Mx2 connectors are screwed into the 12 mm drill holes in the panel. Using the MiniMag with a cordless drill, the connection closes and creates a clamping force of up to 250 kg per connector. Ideal for high gloss painted furniture, molded workpieces, stairs, etc.

https://www.lamello.com/product/bohrenfraesen-verbinder/invis-mx2/